Ինչպես են ավտոմեքենաների ակուստիկ նյութերը բարելավում սրահի հարմարավետությունը | NVH ուղեցույց

How Automotive Acoustic Materials Improve Cabin Comfort

For automotive OEM and Tier 1 engineers, cabin comfort is not simply about reducing a few decibels.

Effective automotive acoustic engineering starts with three fundamental questions:

• Որտե՞ղ է ծագում աղմուկը:
• How does it travel into the cabin?
• Which material or structural solution is best suited to control it?

In automotive NVH engineering, noise generally reaches the passenger compartment through two primary paths:

• Օդային աղմուկ
• Structure-borne noise

Understanding the difference between these two transmission paths is essential when selecting automotive acoustic absorbers, insulation materials, damping layers, decouplers, and multilayer acoustic systems.

Արագ պատասխան

Automotive acoustic materials improve cabin comfort by controlling sound and vibration through several different mechanisms.

Porous fiber materials are mainly used to absorb airborne sound.

Damping materials help reduce panel vibration.

Barrier layers reduce sound transmission.

Decoupling materials help limit vibration transfer between structures.

In real vehicle applications, these functions are often combined into an integrated acoustic package rather than relying on a single material to solve every NVH problem.

1. What Is Automotive NVH?

NVH stands for:

• Աղմուկ
• Թրթռում
• Կոշտություն

Together, these factors strongly influence how drivers and passengers perceive vehicle comfort and quality.

Աղմուկ

Noise refers to the sound heard by vehicle occupants.

Typical automotive noise sources include:

• Tire and road noise
• Քամու աղմուկ
• Շարժիչի աղմուկ
• Electric motor noise
• Gear whine
• HVAC noise
• Cooling system noise
• Body-panel radiation

Different frequency ranges create very different subjective impressions.

Low-frequency noise may be perceived as:

• բուռն
• դղրդյուն
• droning

Higher-frequency noise may be perceived as:

• նվնվոց
• hissing
• sharp tonal noise
• electric motor high-frequency noise

This is why overall sound pressure level alone cannot fully describe cabin acoustic quality.

Թրթռում

Vibration originates from mechanical excitation.

Տիպիկ աղբյուրները ներառում են.

• Tire-road interaction
• Suspension movement
• Powertrain excitation
• Էլեկտրական շարժիչներ
• Փոխանցման համակարգեր
• Կառուցվածքային ռեզոնանս

These vibrations can travel through:

• Կախովի բաղադրիչներ
• Ենթաֆրեյմներ
• Chassis
• Մարմնի վահանակներ
• Seat rails
• Ղեկավար համակարգեր

Some vibrations are directly perceived by occupants.

Others excite body panels, which then radiate sound into the cabin.

Կոշտություն

Harshness refers more to the subjective perception of vehicle vibration and sound quality than to a single physical parameter.

Օրինակներ են:

• Strong impact when driving over road irregularities
• Excessive low-frequency vibration
• Cabin booming at specific vehicle speeds
• Unpleasant structural resonance

The objective of good NVH engineering is therefore not to eliminate every sound.

It is to control undesirable acoustic and vibration energy.

2. How Does Noise Enter the Vehicle Cabin?

From a transmission-path perspective, automotive cabin noise can generally be divided into two major categories:

Airborne Noise

և

Կառուցվածքային աղմուկ

These two mechanisms require different control strategies.

3. What Is Airborne Noise?

Airborne noise is sound energy that primarily travels through the air before reaching the passenger compartment.

For example, tire-road interaction generates acoustic energy around the wheel area.

Part of that sound travels through air and can enter the vehicle through the floor, wheel arch, doors, or other body structures.

Similarly, HVAC blowers generate sound that travels directly through air ducts and the cabin.

Typical airborne noise sources include:

• Քամու աղմուկ
• Tire radiation noise
• HVAC noise
• Cooling fan noise
• Exterior traffic noise
• Some electric motor noise
• Some powertrain noise

Once airborne sound enters the cabin, it can also reflect repeatedly from interior surfaces.

If the vehicle interior has insufficient sound absorption, sound energy may continue reflecting from areas such as:

• Տանիք
• Headliner
• Դռներ
• Կարգավորման հարթակ
• Հատակ
• Խողովակ

This increases the acoustic energy perceived by occupants.

That is why sound-absorbing materials are widely used throughout the vehicle interior.

4. How Do Fibrous Automotive Acoustic Materials Absorb Sound?

PP/PET fibrous acoustic materials are typical porous sound absorbers.

When a sound wave enters the fiber network, air particles move through a complex porous structure.

During this process, acoustic energy is reduced through mechanisms such as:

• Friction between air and fibers
• Վիսկուսային կորուստներ
• Thermal exchange
• Energy dissipation caused by airflow through the porous network

A small portion of the acoustic energy is ultimately converted into heat.

As a result, less sound energy is reflected back into the cabin.

This is the basic principle behind fibrous automotive acoustic absorbers.

5. Why Is Thickness Alone Not Enough?

A common assumption is that thicker acoustic material always performs better.

In reality, automotive sound absorption depends on many parameters, including:

• Հաստություն
• Հիմնական քաշը
• Խտություն
• Մանրաթելերի տրամագիծը
• Fiber structure
• Ծակոտկենություն
• Օդի հոսքի դիմադրություն
• Սեղմման հարաբերակցությունը
• Տեղադրման վիճակը
• Target frequency range

One of the most important parameters is airflow resistance.

If a material is too open, sound can pass through easily, but interaction between the moving air and the fiber network may be insufficient.

If a material is too dense, too much sound may be reflected at the surface instead of entering the porous structure.

High-performance acoustic materials therefore require an appropriate balance between:

Porosity, fiber structure, and airflow resistance.

6. What Is Structure-Borne Noise?

Structure-borne noise begins as mechanical vibration transmitted through the vehicle structure.

Տիպիկ օրինակ է.

Road excitation

↓

Անվադողերի թրթռում

↓

Կասեցումը

↓

Ենթաշրջանակ

↓

Vehicle body

↓

Body-panel vibration

↓

Sound radiation into the cabin

The final sound may still be heard through the air, but the original transmission path was structural.

This is the key difference between structure-borne and airborne noise.

7. Why Can Acoustic Fiber Not Solve All Structure-Borne Noise?

This is one of the most important distinctions in automotive acoustic engineering.

Porous acoustic fiber is mainly designed to absorb airborne sound energy.

If the main problem is strong vibration of a door panel, floor panel, wheelhouse, or another structural component, adding more acoustic fiber alone will not eliminate the root cause.

Structure-borne noise typically requires a combination of several control methods.

Խոնավեցնող նյութեր

Damping layers are used to reduce vibration amplitude in metal or composite panels.

Տիպիկ կիրառման ոլորտները ներառում են.

• Door outer panels
• Հատակի վահանակներ
• Wheelhouse areas
• Trunk panels
• Body sheet metal

Decoupling Materials

Decoupling layers help reduce mechanical coupling between structures.

They are also important in multilayer acoustic systems where a compliant layer is required between a barrier and the vehicle body.

Խոչընդոտող նյութեր

Barrier layers are used to reduce sound transmission.

They typically rely on higher surface mass or multilayer construction to improve transmission loss.

Կլանող նյութեր

Absorbing layers reduce airborne sound energy once that energy reaches the cabin or acoustic package.

In practical vehicle design, these functions are often combined as:

Damping + Decoupling + Barrier + Absorption

8. Airborne and Structure-Borne Noise Are Often Coupled

In real vehicle NVH problems, airborne and structure-borne mechanisms are not completely independent.

Օրինակ `

Road excitation first generates mechanical vibration.

That vibration travels through the suspension and body structure.

The body panel is then excited.

The vibrating panel radiates sound into the cabin air.

The full path may therefore be:

Road Excitation

↓

Structure-Borne Vibration

↓

Body-Panel Vibration

↓

Airborne Sound Radiation

↓

Passenger Perception

For this reason, OEM NVH engineers do not simply ask whether a problem is airborne or structure-borne.

They need to understand:

• Which source is dominant?
• Which transfer path contributes most?
• Which frequency range requires improvement?

9. Different Frequency Ranges Require Different NVH Strategies

No single material can effectively solve every noise problem across the entire frequency spectrum.

Different frequency ranges typically require different engineering strategies.

Ցածր հաճախականությունը

Low-frequency problems are often related to:

• Body modes
• Կառուցվածքային թրթռում
• Պանելային ռեզոնանս
• Suspension excitation
• Powertrain excitation

Severe low-frequency issues usually cannot be solved by lightweight porous absorbers alone.

Typical solutions may include:

• Կառուցվածքային օպտիմալացում
• դատարկում
• Վիբրացիոն մեկուսացում
• Mount optimization
• Body stiffness optimization

Միջին հաճախականություն

Mid-frequency noise often requires a combination of:

• դատարկում
• Decoupling
• Արգելքի կատարում
• Ձայնի կլանում

Mid-to-High Frequency

Fibrous porous absorbers are particularly useful in the mid-to-high-frequency range.

Their acoustic performance can be tuned by adjusting:

• Հաստություն
• Հիմնական քաշը
• Fiber structure
• Օդի հոսքի դիմադրություն

This is why automotive acoustic materials should not be evaluated by a single absorption value.

The full absorption curve across the relevant frequency range is far more meaningful.

10. Why Do Electric Vehicles Change Acoustic Material Requirements?

Electric vehicles do not make NVH engineering easier.

They change the noise spectrum.

In internal-combustion vehicles, engine noise creates a relatively strong background sound that can mask other noise sources.

In electric vehicles, this masking effect is reduced.

As a result, previously less noticeable sounds can become more prominent, including:

• Անվադողերի աղմուկ
• Ճանապարհային աղմուկ
• Քամու աղմուկ
• Էլեկտրական շարժիչի սուլոց
• Շարժիչի աղմուկ
• Inverter tonal noise
• HVAC noise
• Cooling-system noise

EV acoustic design therefore places greater emphasis on:

• Լայնաշերտ ձայնի կլանում
• Mid-to-high-frequency noise control
• Թեթևություն
• Նյութերի ինտեգրում
• Local acoustic optimization

11. Why Are Lightweight Acoustic Materials Becoming More Important?

Adding more NVH material can improve acoustic performance.

However, additional material also increases vehicle mass.

This can directly affect:

• Տրանսպորտային միջոցների քաշը
• Էներգասպառումը
• EV driving range
• Արտադրության արժեքը
• Հավաքման բարդությունը

For this reason, the goal is not simply to add more material.

The objective is to achieve the required acoustic performance with lower weight and less installation space.

This is one of the main advantages of fibrous automotive acoustic materials.

Կարգավորելով՝

• Մանրաթելի կազմը
• Հիմնական քաշը
• Հաստություն
• Խտություն
• Շերտային կառուցվածք

the material can be optimized for different locations and vehicle platforms.

12. Where Are Automotive Acoustic Materials Used?

Different vehicle zones have different acoustic requirements.

Roof and Headliner

Տիպիկ մտահոգությունները ներառում են.

• Քամու աղմուկ
• Cabin reverberation
• Rain impact noise
• Լայնաշերտ ձայնի կլանում

Low weight is particularly important in this area.

Դռներ

Door systems may be affected by:

• Exterior airborne noise
• Door-panel vibration
• Cavity resonance
• Speaker interaction

For this reason, door acoustic systems often require both absorption and structural vibration control.

Firewall and Dashboard Area

This is one of the most important NVH control zones.

Typical noise sources include:

• Powertrain noise
• Ճանապարհային աղմուկ
• HVAC noise
• Structural radiation

Multilayer acoustic systems are commonly used here rather than a single absorber.

Հատակ

Տիպիկ մտահոգությունները ներառում են.

• Tire-road excitation
• Suspension noise
• Underbody noise
• Կառուցվածքային թրթռում

Common floor acoustic systems may include:

Absorber + Decoupler + Barrier

with localized damping where necessary.

Wheel Arch

The wheel area is one of the most important noise sources in the vehicle.

Acoustic materials used here may need to address:

• Անվադողերի աղմուկ
• Road excitation
• Stone impact
• Ջրի ազդեցություն
• Աղտոտումը

Therefore, material selection must also consider:

• Խոնավության դիմադրություն
• երկարակեցություն
• Աղտոտման դիմադրություն

Խողովակ

Rear-wheel and rear-body excitation can introduce significant acoustic energy into the trunk cavity.

Absorptive materials can reduce cavity reflection and help limit further sound propagation toward the passenger compartment.

Pillars and Body Cavities

Vehicle cavities can act as acoustic transmission paths.

Proper use of:

• Acoustic absorbers
• Cavity fillers
• Կնքման համակարգեր

can reduce sound transmission through these areas.

13. Which Material Parameters Should OEM Engineers Evaluate?

Automotive acoustic materials should not be evaluated only by whether they are “good at absorbing sound.”

A more complete evaluation should include the following parameters.

Ակուստիկ կատարում

• Ձայնի կլանման գործակիցը
• Frequency-dependent absorption curve
• Օդի հոսքի դիմադրություն
• Օդի հոսքի դիմադրություն

Ֆիզիկական հատկություններ

• Հաստություն
• Հիմնական քաշը
• Խտություն
• Սեղմման վերականգնում
• Տարբեր կայունություն

Բնապահպանական կատարում

• Ջերմային դիմադրության
• Խոնավության դիմադրություն
• Ծերացման դիմադրություն

Automotive Requirements

• Դյուրավառություն
• VOC performance
• Հոտը
• Մառախուղ
• Նյութերի համատեղելիություն

Մշակման կատարումը

• Die կտրում
• Mերմամեկուսացում
• Լամինացիա
• Ինքնասոսնձվող թիկունք
• Aluminum foil lamination
• Complex-shape conversion

Կայունություն

• Թեթևություն
• Վերամշակելիություն
• Material simplification
• Վերամշակված բովանդակություն

14. Why Is Installation Condition as Important as Material Data?

The same acoustic material can perform very differently under different installation conditions.

Կարևոր գործոնները ներառում են.

• Օդային բացը
• Սեղմում
• Backing surface
• Տեղադրման տարածք
• երկրաչափություն
• Edge leakage
• Adjacent materials
• Բազմաշերտ կառուցվածք

For example, a material with a free-state thickness of 20 mm may behave very differently if compressed to 8 mm after installation.

Compression can change:

• Ծակոտկենություն
• Օդի հոսքի դիմադրություն
• Effective thickness
• Ակուստիկ կատարում

This is why automotive acoustic materials should not be evaluated only from laboratory datasheets.

Final installed condition must also be considered.

15. Transulate™ Automotive Acoustic Materials

Թարգմանել™ is a PP/PET bicomponent fiber material series developed by SINOYQX for automotive acoustic and thermal-management applications.

The material is designed for applications including:

• Automotive sound absorption
• Malերմամեկուսացում
• Lightweight acoustic packages

Տիպիկ կիրառման ոլորտները ներառում են.

• Տանիք
• Headliner
• Դուռ
• Կարգավորման հարթակ
• Firewall
• Հատակ
• Խողովակ
• Սյուն
• Ներքին հարդարում

Depending on the project, key material parameters can be customized, including:

• Հիմնական քաշը
• Հաստություն
• Խտություն
• Fiber structure
• Lamination structure

16. How to Select the Transulate™ Series

Թարգմանել™ LT Series

Typical basis weight:

100–200 գ/մ²

Տիպիկ հաստություն՝

10–20 մմ

Suitable for lightweight applications such as:

• Տանիք
• Headliner
• Դուռ
• Սյուն
• Ներքին հարդարում

The key focus is low weight.

Թարգմանել™ AP Series

Typical basis weight:

300–500 գ/մ²

Տիպիկ հաստություն՝

20–30 մմ

Հարմար է:

• Firewall
• Դուռ
• Հատակ
• Խողովակ
• General acoustic packages

Transulate™ HP Series

Typical basis weight:

600–900 գ/մ²

Տիպիկ հաստություն՝

30–50 մմ

Suitable for applications requiring higher sound absorption and where more installation space is available.

17. What Additional Processing Options Are Available?

Depending on OEM and Tier 1 project requirements, Transulate™ can be supplied or converted as:

• Rolls
• Թերթ
• Կտրված մասեր
• Self-adhesive parts
• Aluminum-foil laminated products
• Nonwoven-faced products
• Multilayer composites
• Անհատականացված հաստություն
• Customized basis weight

The final acoustic structure should be selected according to:

Target Frequency + Installation Location + Available Space + Weight Target

18. Automotive Acoustic Engineering Is Moving from Material Selection to System Design

The future of automotive NVH development is not simply about identifying which absorber has the highest sound absorption coefficient.

Ավելի կարևոր հարցերն են՝

• Which noise source is dominant?
• Which transfer path is most important?
• Which frequency range needs improvement?
• Which material is best suited to the location?
• How can the target performance be achieved with less weight?

A more effective development process is:

Identify the Noise Source

↓

Analyze the Transfer Path

↓

Define the Target Frequency

↓

Select the Control Strategy

↓

Համապատասխանեցրեք նյութը

↓

Validate at Component Level

↓

Validate at Vehicle Level

This is how material performance can be converted into real cabin comfort.

Եզրափակում

Vehicle cabin comfort is not controlled by a single material.

Airborne noise is mainly managed through:

Sound absorption and sound insulation.

Structure-borne noise generally requires:

Damping, vibration isolation, decoupling, and structural optimization.

Fibrous automotive acoustic materials play an important role in reducing airborne sound energy, limiting cabin reflections, and improving mid-to-high-frequency acoustic performance.

This becomes even more important in electric vehicles, where reduced engine masking makes tire noise, wind noise, and electric-drive tonal noise more noticeable.

At the same time, vehicle manufacturers continue to reduce weight.

For this reason, the next generation of automotive acoustic systems is not about adding more material.

Խոսքը վերաբերում է հետևյալին.

Using the right material, in the right location, for the right frequency range.

Transulate™ automotive acoustic materials can be customized according to OEM and Tier 1 requirements, including application location, target frequency, thickness, basis weight, lamination structure, and annual demand.

Հաճախակի տրվող հարցեր

What is the difference between airborne noise and structure-borne noise in a vehicle?

Airborne noise travels primarily through air, such as wind noise, HVAC noise, and some tire noise.

Structure-borne noise begins as mechanical vibration transmitted through the suspension, body, or other structural components before being radiated as sound.

Can automotive acoustic fiber directly reduce structure-borne noise?

Ոչ ամբողջությամբ։

Porous fibrous materials primarily absorb airborne sound.

If the main problem is structural panel vibration, additional damping, isolation, decoupling, or structural optimization is usually required.

What are the most important parameters for automotive sound absorbers?

Important parameters include thickness, basis weight, fiber structure, airflow resistance, absorption performance across frequency, compression condition, installation gap, and target frequency range.

Why are lightweight acoustic materials important for electric vehicles?

Electric vehicles have less engine masking noise, so tire noise, wind noise, electric motor noise, and other high-frequency sounds become more noticeable.

At the same time, lower vehicle mass helps improve energy efficiency and driving range.

Where can Transulate™ automotive acoustic materials be used?

Typical applications include roof, headliner, doors, firewall, dashboard, floor, trunk, pillars, and interior trim.

The final material specification should be selected according to installation space, target frequency, basis weight, and thickness requirements.